elektronische bauelemente rl201g~RL207G voltage 50v ~ 1000v 2.0 amp glass passivated rectifiers 19-dec-2011 rev. b page 1 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed individually. rohs compliant product a suffix of ?-c? specifies halogen & lead-free features ? low forward voltage drop ? high current capability ? high reliability ? high surge current capability ? glass passivated junction mechanical data ? case: molded plastic ? epoxy: ul 94v-0 rate flame retardant ? lead: axial leads, solderable per mil-std-202, method 208 guaranteed ? polarity: color band denotes cathode end ? mounting position: any ? weight: 0.43 grams (approximately) maximum ratings and electrical characteristics (rating 25 c ambient temperature unless otherwise specified. sing le phase half wave, 60hz, resistive or inductive load. for capacitive load, de-rate current by 20%.) part number parameter symbol rl 201g rl 202g rl 203g rl 204g rl 205g rl 206g rl 207g unit maximum recurrent reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum instantaneous forward voltage @ i f = 2a v f 1 v maximum average forward rectified current. 0.375? (9.5mm) lead length @ t a = 75c i o 2 a peak forward surge current, 8.3ms single half sine-wave superimposed on rated load(jedec method) i fsm 70 a t a =25c 5 maximum dc reverse current t a =100c i r 50 a typical junction capacitance 1 c j 20 pf r ja 40 typical thermal resistance 2 r jc 25 c / w operating and st orage temperature range t j , t stg -65~175 c note: 1. measured at 1mhz and applied reverse voltage of 4.0v d.c. 2. thermal resistance from junction to ambient .375" (9.5mm) lead length. a c b a d millimete r ref. min. max. a 25.4 (typ) b 5.80 7.62 c 2.60 3.60 d - 0.90 do-15
elektronische bauelemente rl201g~RL207G voltage 50v ~ 1000v 2.0 amp glass passivated rectifiers 19-dec-2011 rev. b page 2 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed individually. ratings and characteristic curves
|